Excellent Corrosion Protection BS5163 Ductile Iron Double Flanged Resilient Seat Gate Valves

• Customization: Available
• Product Name: Gate Valve
• Transport Package: Standard Packing
• Model NO.: YH
• Specification: 450*350*240
• Trademark: YH
• Origin: China
• Production Capacity: 500000/Month

Product Description

Product Description

temperature of media	High Temperature, Low Temperature, Medium Temperature
Type	Non-Rising Stem Resilient Seated Gate Valve
Working Temperature	0- 100

Detailed Photos

BS 5163 adopt British Standard:
it is with medium length, Flat bottom seat ring Integral with the body. Inside and outside epoxy resin coating,wedge wholly bonded with rubber. Three "O" ring sealing. These all insure excellent corrosion protection and reliable sealing capability. AS per request, the gate valves can be actuated by operating lever, hand wheel electrical actuator and so on.
Unipe design:
* Compact design
* Length: medium length
* One-piece bonnet,non-rising stem
* Stem nut is separated from wedge.no seizing-up
* Flat bottom seat ring Insures no dead space
* "O"ring design for stem back sealing leads to maintenance free
Excellent Corrosion Protection:
* Inside epoxy resin coating or vitreous enamel(upon request)
* Outside epoxy resin coating
* Socket head cap bolts,sealed with glue on the top
Reliable Health Nature:
* Epoxy resin coating complies with the WARS certification
* Wedge bonded with rubber for the health inspection.
* Trims are made of stainless steel or bronze
Scope of Application:
* Potable water supply
* Industrial fields

Company Profile

Packing:

Usually packed by plywood crates or pallets.

 

For correct  Transporting operation, please also refer to:

It is important to apply a few simple chocking and lashing rules to minimize the risks of incident during transport.
Vehicles must be suitable for the transport, loading and uploading of ductile iron pipes and fittings. Apply the following basic rules:
-Prevent any contact between the valve elements and metal surfaces (to avoid damaging the coatings).

-Make sure the valves do not come into direct contact with the trailer floor (store the pipes horizontally by placing two parallel rows of good quality wooden planks fastened to the floor).
-Make sure that the valves can be loaded and unloaded in complete safety.
-Make sure that the load is secure during transport.
-Always use vehicles or trailers with sufficiently large stanchions fitted on each side of the floor to stabilize the load.
-Lash the load with textile straps and lever tensioners.